53080 Bronze ‘Utility Pump’ AC Motor Pump Unit

53080 Bronze 'Utility Pump' AC Motor Pump Unit

080 Size Bronze Flexible Impeller Utility Pump

Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 2 bar

 

Model No.: 53080 Series

  • Easy to service and maintain.
  • Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
  • Handles hard and soft solids without clogging.
  • Non pulsating flow.
  • Handles viscosities up to 500 centiPoise.
  • Dry running capability for 30 minutes.

 

Specifications

Body Materials Bronze
Impeller Neoprene or Nitrile
Seal Carbon/Ceramic mechanical seal
Bearings Uses motor bearings
Shaft Material Stainless steel, shaft extension
Port Type 1.5″ BSP internal thread to BS21 (DIN2999)
Voltage 230 (VAC)
Frequency 50 (Hz)
Motor 550W IP55
Cable Fitted with 2m long supply cable
Weight 15 (kg)
33 (lb)

 

3 Models

53080-2001
Jabsco 53080 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 80 LPM, pressure up to 29 psi (2.0 bar)

CE Yes
Voltage 230/1/50
Impeller Neoprene
Style MPU
53080-2003
Jabsco 53080 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 80 LPM, pressure up to 29 psi (2.0 bar)

CE Yes
Style MPU
Voltage 230/1/50
Impeller Nitrile
53080-2063
Jabsco 53080 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 80 LPM, pressure up to 29 psi (2.0 bar)

CE Yes
Voltage 220V50
Impeller Nitrile
Style MPU

Downloads

 Technical Data Sheet