53040 Bronze ‘Utility Pump’ AC Motor Pump Unit

53040 Bronze 'Utility Pump' AC Motor Pump Unit

040 Size Bronze Flexible Impeller Utility Pump

 

Flow rate: Nominal 35 Litres/min (7.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 2 bar

 

Model No.: 53040 Series

  • Easy to service and maintain.
  • Will tolerate abrasive wear (this may affect performance – seek advice from your distributer).
  • Handles hard and soft solids without clogging.
  • Non pulsating flow
  • Handles viscosities up to 500 centiPoise
  • Dry running capability for 30 minutes

 

Specifications

Body Materials Bronze
Impeller Neoprene or Nitrile
Seal Carbon/Ceramic mechanical seal
Bearings Uses motor bearings
Shaft Material Stainless steel motor shaft
Port Type 1″ BSP internal thread to BS21 (DIN2999)
Voltage 110 or 230 (VAC)
Frequency 50 (Hz)
Motor 550W IP55
Cable Fitted with 2m long supply cable
Weight 9.5 (kg)
20.9 (lb)

 

5 Models

53040-2001
Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar)

CE Yes
Voltage 230/1/50
Impeller Neoprene
Style MPU
53040-2003
Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar)

CE Yes
Voltage 230/1/50
Impeller Nitrile
Style MPU
53040-2021
Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar)

CE Yes
Voltage 230/1/50
Impeller Neoprene
Style MPU
53040-2101 53040 Bronze ‘Utility Pump’ AC Motor Pump Unit
Impeller Neoprene
Voltage 110 (VAC)
Amp Draw 8 (amp)
Poles 4
Speed 1450 (rpm)
53040-2103
Jabsco 53040 Bronze PumpSelf-primes from dry up to 3 metres, flows up to 35 LPM, pressure up to 36.3 psi (2.5 bar)

CE Yes
Voltage 110/1/50
Impeller Neoprene
Style MPU

Downloads

 Technical Data Sheet