Wakeboard and Ski boat Ballast Pump
Flow rate: 15 USgallons/min (57 Litres/min)
Self-priming from dry up to 1.2m (4ft)
Model No.: 22610 Series
- Adds approx 125lbs (56kgs) of ballast per minute
- Reversible to both fill and empty tanks
- Simple design means fewer wearing parts.
- ISO 8846 MARINE (Ignition protection).
The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
|Impeller||Jabsco Neoprene compound|
|Port(s)||1/2″ Internal Pipe Threads 1″ External Hose Barb|
|Amp Draw||19 (amp)|
|Fuse Size||25 (amp)|
|Motor Type||Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type
Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
|Duty Cycle||30 Minutes Max.|
|Dimensions||9.3 x 20.3 x 12 (cms)
3 5/8 x 8 x 4 3/4 (inches)
|22610-2007||Reversing Switch Not Included|
|22610-9007||Reversing Switch Not Inlcuded|
|22610-9407||Deutsch Connector, No Reversing Switch|
|22610-9507||Reversing Switch Included|